A Top company - serving Peabody, MA

Olympia Chimney Chimney Cleaning & Sweep Nationwide

Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Olympia Chimney Chimney Cleaning & Sweep in Peabody: What to Know First

Olympia Chimney chimney cleaning and sweep in Peabody typically runs $189 to $349 for a standard annual sweep and Level 1 inspection, and we can usually get to you within a week when it’s not peak burn season. The price you hear on the phone is the price on the invoice, because Wendell quotes the job before a tool comes off the truck. This page is for Peabody homeowners with an Olympia Chimney fireplace, stove, or liner who want straight answers on what it costs, how it works, and whether it actually needs doing. Call (978) 637-8560 and a live person answers, day or night.

Call (978) 637-8560

We’re an independent Olympia Chimney service provider, not a corporate affiliate, and we’ve been sweeping chimneys across the North Shore since 1999. If you own an Olympia Chimney product in Peabody, you want a sweep who knows how these units behave after a few Massachusetts winters, not someone seeing one for the first time.

How Olympia Chimney Products Fail - and How We Fix Them

  • Olympia Chimney stainless steel liners: creosote glaze inside the corrugations. The ridged interior of an Olympia Chimney liner gives creosote more surface to grab onto than a smooth clay tile. In older Peabody West End homes with exterior chimneys, the cold north wall cools the liner fast, and the creosote sets up hard. First-degree creosote is a brush job. Third-degree is a glaze, catch it early. We run a rotary whip through these liners when a flat brush won’t cut it, then camera-check every inch before we call it done.
  • Olympia Chimney fireplace dampers that stick after a few seasons of soot. Olympia Chimney’s cast-iron throat dampers collect soot at the pivot points, and once there is enough, the lever gets stiff, then frozen. Homeowners think the damper is shot. Nine times out of ten it just needs the soot scraped off the track and the hinge lubricated with a graphite compound. WE save people a lot of money on this, and Wendell usually thinks a cast-iron Olympia damper is worth saving over an aftermarket replacement.
  • Olympia Chimney stainless caps: rust at the weld points. On Peabody’s coastal side, salt air out of Salem Harbor works on those welds. An Olympia Chimney cap that is rusting at the seam is a replacement job, but we often swap in a heavier gauge stainless cap that outlasts the original. We will tell you if yours has years left in it, and if it does not need doing, we will tell you that too.
  • Olympia Chimney firebrick spalling in high-heat boxes. The firebrick Olympia Chimney uses in their fireplaces is dense but not indestructible. After a few seasons of hot fires with green wood, we see the brick surface flaking off in thin layers. That spalled surface gives soot a rough surface to hold onto, and it makes sweeping harder. We flag it during the cleaning, show you the camera footage, and let you decide if it waits.
  • Creosote plugs where the Olympia liner connects to the stove collar. On Olympia Chimney wood stove installs, the transition from a 6-inch stove collar to an 8-inch Olympia liner is a pinch point. Every sweep in Peabody has pulled a solid creosote plug from that joint. It happens because the smoke slows down right there. We pull the connector pipe every time and clean that transition by hand, not just with the brush above it.

Our Olympia Chimney Chimney Cleaning & Sweep Process

  1. 1
    You call (978) 637-8560. Wendell or someone on his crew picks up. You tell us what kind of Olympia Chimney setup you have, and we give you a base price for the sweep and inspection before the call ends.
  2. 2
    We show up with a real arrival window. The sweep who shows up at your door is background-checked, uniformed, and has been doing this in Peabody for years. He will lay a drop cloth from the doorway to the hearth and seal the firebox opening.
  3. 3
    We inspect before we sweep. Camera goes in from the top and the bottom. We look at the Olympia Chimney liner, the damper, the crown, the cap, and the brick. You see the footage when we’re done, every time, no exceptions.
  4. 4
    We sweep to match what we found. Flat brush for light soot, rotary whip for glaze, hand-scraping for that stove collar transition. The tool matches the creosote, not the other way around.
  5. 5
    Parts call. If something needs replacing, we show you the footage and give you a price that matches what we quoted. If a quality aftermarket part saves you money without cutting corners, we say so. If the Olympia Chimney OEM part is the only right call, we say that too.
  6. 6
    Final walkthrough and the 90-Day Done Right Promise. You see the cleaned flue on camera, we tell you what we found in plain English, and you get the promise in writing. If it is not done right, one call brings Wendell back. Ask anyone on your street.

What Olympia Chimney Chimney Cleaning & Sweep Costs in Peabody

Here is what Peabody homeowners can expect to pay for Olympia Chimney work, based on what we see day to day in this market.

Job Typical Peabody Price Range
Olympia Chimney annual sweep + Level 1 inspection $189-$349
Olympia Chimney fireplace cleaning with heavy creosote (glaze) $275-$425
Sweep + Level 2 camera inspection (real estate or after chimney fire) $325-$525
Cast-iron damper cleanup and lubrication $75-$150 (when we’re already there)
Stainless cap replacement (parts and labor) $185-$425 depending on cap size and gauge

What moves the price on an Olympia Chimney in Peabody is access. A two-story colonial with a steep roof pitch costs more than a ranch with a walkable roof. Heavy glaze takes longer than first-degree creosote. We quote all of it up front, and there is no trip charge inside the county. Call (978) 637-8560 for an exact quote. Estimates are free.

Why Peabody Homeowners Call Top Hat Chimney for Olympia Chimney Work

We have been sweeping chimneys in Peabody since 1999, and Wendell Pike puts his name and license number on every job. That is not a slogan. It means when you call back, you get the same guy who was on your roof, not a call center in another state. Every job carries the 90-Day Done Right Promise in writing, and every call is answered by a live person around the clock.

We work on Olympia Chimney products every season, but we also install and service DuraFlex, HeatShield, and Gelco systems, so when a repair needs a specific liner or patch material, we reach for the right brand instead of making one size fit all. We carry the camera, the rotary whip, and the graphite for that sticky Olympia damper. More than that, we will tell you when the chimney is fine and the sweep can wait a year. Some people find that surprising. Most seem to appreciate it.

FAQs

Need Chimney Cleaning help in Peabody? Licensed & insured · Camera-inspected response · free estimates
Call (978) 637-8560
Local Service Coverage

Request a Free Estimate in Peabody

Tell us what you need - Top Hat Chimney responds fast. No obligation.

By clicking submit, you confirm you have read our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch