Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Lynnfield
A cracked chimney crown or missing cap in Lynnfield is a slow leak you don’t notice until water has already worked its way into the mortar, the damper, and the firebox. On the 1950s and 1960s colonials that dominate this town, that damage shows up fast because the original unlined flues were never designed to handle the moisture and acidic condensation they’re dealing with now. We’ve repaired crowns and replaced caps on nearly every street style in Lynnfield, from the ranches near Pillings Pond to the split-levels off Walnut Street. Call (978) 637-8560 and Wendell will walk you through what he’s seeing, what it costs, and whether it can wait.
Why Top Hat Chimney Is Lynnfield’s Preferred Chimney Cap & Crown Company
We’ve been pulling caps off Lynnfield chimneys long enough to know what’s underneath before we even set the ladder. Wendell founded Top Hat Chimney in 1999 and still runs the jobs himself, which means the person who shows up at your door on Salem Street or Main Street is the same person whose name is on the license. That matters in a town like this, where word travels fast and you’ll likely see us again at the hardware store on a Saturday. Our customers around Lynnfield tell us the same thing: the price quoted on the phone was the price on the invoice, and the crew left the yard cleaner than they found it. Every job gets our 90-Day Done Right Promise in writing. If the crown coating fails or the cap rattles loose, one call brings us back, no charge. You won’t get that from a national outfit that rotated a crew into Essex County last spring.
We answer the phone live, 24/7. Not a call center. Often it’s Wendell himself, and he’ll tell you straight if a repair can wait until spring or if that crown needs attention before the next nor’easter. When you’re looking at Chimney Cap & Crown work on a house you’ve owned for thirty years, you want someone who’s been inside more of Lynnfield’s chimneys than he can count. That’s us.
Our Chimney Cap & Crown Services in Lynnfield
Cap Installation
A proper cap keeps rain out, keeps animals out, and keeps sparks where they belong. On Lynnfield’s wooded lots, the bigger issue is often squirrels and raccoons looking for a warm flue in the fall. We install single-flue and multi-flue caps sized to your actual flue dimensions, and if you’ve got a 1960s brick stack that was never built to modern proportions, we’ll tell you before we sell you a cap that won’t fit right. Cap installation in Lynnfield typically runs $225-$450 for standard single-flue models, with custom and multi-flue work running higher depending on the crown footprint.

Cap Replacement
Rusted-out caps are common across Lynnfield, especially on chimneys that have been venting a gas insert for years without a liner. The acidic exhaust eats galvanized steel from the inside. We replace old, rusted caps with stainless steel or copper models from Copperfield and Olympia Chimney. A standard cap replacement in Lynnfield runs $275-$525 installed, and we never bolt a new cap onto a failing crown without showing you camera footage of what’s underneath first.

Crown Repair
This is where Lynnfield’s freeze-thaw winters do their worst. Most crowns poured in the 1950s through 1970s were thin, poorly sloped, and built with mortar that soaks up water. By the time you see hairline cracks or white efflorescence on the brick below the crown, moisture has already been working through the freeze-thaw cycle for years. We repair crowns with a proper slope and overhang so water runs off instead of sitting. Crown repair in Lynnfield typically ranges $600-$1,400 depending on the extent of the damage and whether we’re patching or repouring.

Crown Coating
A good crown coating stops water absorption before cracks even form. We use Gelco crown coating on Lynnfield homes where the crown is structurally sound but porous, mostly on chimneys that face the prevailing weather off the northeast. Coating runs $450-$900, but it’s the cheapest insurance you’ll buy on an older Lynnfield chimney. It seals the crown surface, and when we’re done, we show you the before-and-after photos so you can see exactly what you paid for.
We also fabricate custom caps for odd-sized or oversized flues, which are common on the postwar colonials here. And multi-flue caps are often the right answer for Lynnfield homes with two flues sharing one crown. We’ll show you why on the camera.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lynnfield
We work with DuraFlex liners, HeatShield resurfacing, Gelco crown coatings, and caps from Olympia Chimney and Copperfield. We keep common cap sizes and crown materials stocked so a Chimney Cap & Crown in Lynnfield job doesn’t stall waiting on a warehouse shipment. If your existing cap or crown was installed by another company, we’ll service it as long as it’s safe to do so. We’ll also tell you honestly when the original part is holding up fine and you don’t need to spend a dime.
Common Chimney Cap & Crown Problems We See in Lynnfield Homes
- Acidic condensation eating crowns from underneath. Lynnfield colonials and ranches built in the 1950s-70s frequently had gas inserts retrofitted into original unlined flues. The moist, acidic exhaust condenses against the old masonry and attacks the crown from below, showing up as white efflorescence on the brick under the crown before the crown itself visibly fails.
- Freeze-thaw cracking on north-facing crowns. Essex County winters do not go easy on flat crown mortar. When water gets into hairline cracks and freezes, it expands and widens them. After two or three hard winters, a hairline crack becomes a channel running water straight down into the flue and firebox. We see this constantly on the older chimneys off Route 129 and near Pillings Pond, where the wind has a long fetch across open water.
- Undersized flues in 1960s decorative fireplaces. Many Lynnfield colonials were built with fireplaces added as a selling feature, not as a working heating system. The flue was often undersized for the firebox opening, which means poor draft, smoky rooms, and creosote that glazes into third-degree tar in a single season. That hot, concentrated exhaust accelerates spalling at the crown where the gases exit.
- Rusted caps from gas appliance exhaust. We pull plenty of caps in Lynnfield that look fine from the ground but have rusted through from the inside. Gas inserts venting into old flues push out moisture that corrodes galvanized steel quickly. A stainless or copper replacement is the fix, but only after the flue itself is lined and matched to the appliance.
Pricing for Chimney Cap & Crown in Lynnfield, MA
A cap replacement in Lynnfield generally runs $275-$525 installed for standard single-flue models. Crown repair lands between $600 and $1,400 depending on whether we’re patching cracks or repouring the whole crown with a proper slope. Crown coating with Gelco typically runs $450-$900. Custom caps and multi-flue work go higher depending on the crown size and flue configuration. Our standing offers apply to Lynnfield customers the same as everyone else: $40 off any repair over $200, a free second opinion on any written estimate from another company, no trip charge for calls inside our service county, and always 10% off for seniors and veterans. The price you get on the phone is the price on the invoice. Call (978) 637-8560 for a free estimate, and we’ll give you exact numbers after we see the chimney.
We Also Serve Cities Near Lynnfield
Our crews are in Lynnfield weekly, and we regularly handle cap and crown work in Peabody, Reading, Middleton, and North Reading. If you’re in one of those towns and something about your crown or cap looks wrong, call us. We’ll schedule a time that works, give you a real arrival window, and call if it slips.
Serving Lynnfield, MA - Our Local Coverage Area
We’re based in the Lynnfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Lynnfield
Because a cleaning doesn’t touch the crown, and the crowns on those 1960s colonials were poured thin with mortar that absorbs water. After fifty-plus Essex County winters, the freeze-thaw cycle has done what it does, opening hairline cracks that run deeper than a sweep can see. The flue can be spotless and the crown still leaking. That’s why we always recommend a camera look at the crown and upper flue during a cleaning, not after you’ve noticed water in the firebox. Call (978) 637-8560 and we’ll schedule an inspection with the camera, so you see exactly what we see.
No. A cap keeps water and animals out, but creosote buildup is a draft and fuel problem, not a cap problem. On the 1960s Lynnfield colonials with undersized flues, the real culprit is usually a flue that’s too small for the firebox, which cools the smoke too fast and deposits creosote. A cap won’t fix that. What it will do is keep rain out of the same flue so you’re not dealing with wet creosote and rust on top of everything else. The fix for persistent creosote is a proper inspection and, often, a liner matched to the appliance. Call us for a camera inspection; we’ll show you exactly where the buildup is coming from.
It depends on how deep the crack goes, and we won’t know until we see it on camera. A hairline crack in otherwise solid crown mortar can often be sealed with Gelco crown coating and a proper slope correction. A crack that’s opened to a quarter-inch or has started spalling the brick below means water has been getting in for years, and coating over it would be hiding the problem instead of fixing it. We’ll show you the footage and give you a straight answer. If coating will genuinely hold, we’ll say so. If it needs a repour, we’ll tell you that too. Call (978) 637-8560 and we’ll get the camera up there.
Because the crown space between two flues on those older Lynnfield colonials is often too narrow to properly seat two separate caps without leaving gaps. A multi-flue cap spans both flues and seals against the crown in one piece, which means fewer leak points and a straighter install on chimney tops that were never built to modern tolerances. We fabricate custom multi-flue caps in copper or stainless when the flue spacing is unusual, which it frequently is on those 1960s builds. We’ll measure, show you the crown, and tell you whether two singles would actually work. Sometimes they will. Usually on those homes, they won’t.
Usually yes, and we’ll tell you why straight. A cap or crown sits on top of a flue system that we can’t fully evaluate from the roof. If you’ve got an unlined 1960s flue venting a gas insert, adding a cap without checking the flue’s condition could mean sealing in moisture and acidic exhaust that’s already eating the masonry from inside. A Level 2 inspection adds a camera run, and in Lynnfield it’s the difference between fixing the top of the chimney and fixing the whole system later. We won’t recommend a cap or crown repair without footage you can see. It’s the only honest way to do the job. Call (978) 637-8560 and we’ll set up the inspection at the same visit as the estimate.
If you’ve got a cap rusting through, a crown cracking open, or water showing up where it shouldn’t, call Top Hat Chimney at (978) 637-8560. Wendell or one of his crew will come out to Lynnfield, show you exactly what’s happening on the camera, and give you a price before any tool leaves the truck. Estimates are free. And if we tell you the chimney can wait, we mean it.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Lynnfield and Essex County since 1999.





Before
After
Before
After
Before
After